Head-to-head test
BLUETTI Elite 30 V2 vs Goal Zero Sherpa 100AC
Real-world runtimes, scenario verdicts, and ownership costs compared — which wins for your use case.
Full profiles: BLUETTI Elite 30 V2 → · Goal Zero Sherpa 100AC →
Written by Wenny ZhengUpdated
Portable Power Tester, Station Arena Test Desk
$249.99 · direct from BLUETTI
Last checked 8 hours ago. Prices move — check before you buy.
$249.95 · direct from Goal Zero
Last checked 8 hours ago. Prices move — check before you buy.
Spec deltas
The BLUETTI Elite 30 V2 (288Wh) and Goal Zero Sherpa 100AC (95Wh) sit in different weight classes. The real question: do your power needs justify the larger unit, or would you be overpaying for capacity that sits unused? We'd buy the Elite 30 V2.
The Elite 30 V2 holds 193Wh more than the Sherpa 100AC — about 2 hours on a fridge against 1 — a real but modest edge that shows up mainly on longer outages. For camping, tailgating, or keeping devices charged, both have the headroom, so price, weight, and longevity lead the decision instead.
Pick the Elite 30 V2 if your primary use is afternoon off-grid. Go with the Sherpa 100AC if its specific strengths below line up better with your use. Most buyers stop at the sticker price and miss this: over a full lifespan the Elite 30 V2 works out to about $0.28/kWh against the Sherpa 100AC's $5.28, a gap that compounds in the Elite 30 V2's favor the more you cycle it. Keep scrolling for the full breakdown. The scenario verdicts below hold a few surprises.
Bench Notes
What each unit does well, where it falls short, and the trade-offs that matter.
BLUETTI Elite 30 V2
At 600W, this unit is strictly for personal electronics (phones, laptops) and small CPAP machines. Do not expect to run kitchen appliances. At only 10.3 lbs, it is exceptionally portable. You can easily carry it one-handed to a campsite or tailgating party.
Strengths
- +Costs $10.9 less
- +Larger battery capacity
- +Higher AC output
- +Longer warranty
- +Faster solar charging
- +Rated for 3,000 charge cycles — much longer battery lifespan
Trade-offs
- –No major technical downsides compared to rival.
Goal Zero Sherpa 100AC
At 100W, this unit is strictly for personal electronics (phones, laptops) and small CPAP machines. Do not expect to run kitchen appliances. At only 2.1 lbs, it is exceptionally portable. You can easily carry it one-handed to a campsite or tailgating party.
Strengths
- +Lighter by 8.2 lb
Trade-offs
- –Lacks smartphone app control for remote monitoring.
- –Shorter-lived battery — rated for 500 charge cycles vs the Elite 30 V2's 3,000, so it wears out sooner.
Will It Power Your Gear?
Scenario math and per-appliance runtimes, modeled from the spec record.
Scenario verdicts
We ran the math on seven real-world scenarios. Here's which unit survives your actual life.
SCN-01 · 2 nights · needs 2,100Wh
Weekend Camping
Two nights off-grid with essential comfort
Neither unit
Neither unit covers this scenario's 2,100Wh: the Elite 30 V2 comes up 1,855Wh short (about 12% covered), the Sherpa 100AC 2,020Wh (4%). This is well outside what either unit is for; the right answer here is a larger station, not a choice between these two.
Battery budget usedlower = more headroom
LOAD Phone Charger 15W×6h · LED Lights 40W×8h · Box Fan 75W×14h · CPAP Machine 40W×16h
SCN-02 · 8 hours · needs 1,645Wh
8-Hour Blackout
Keep the essentials running through a night without power
Neither unit
The Sherpa 100AC can start the 150W peak but not hold it — 150W of surge gets it going, then the 100W continuous rating takes over, so capacity never gets a say. This is the wrong size of unit for the job rather than a close call. The Elite 30 V2 doesn't have the energy either — 245Wh usable against 1,645Wh, 1,400Wh short — so neither route works.
Battery budget usedlower = more headroom
LOAD Fridge 150W×8h · Router + Modem 20W×8h · LED Lights (4 bulbs) 40W×6h · Phone Charger 15W×3h
SCN-03 · 8 hours · needs 320Wh
CPAP Overnight
Sleep therapy without interruption — the #1 medical use case
Neither unit
Neither unit covers this scenario's 320Wh: the Elite 30 V2 comes up 75Wh short (about 76% covered), the Sherpa 100AC 240Wh (25%). On a CPAP that is not a shorter night — the machine stops when the battery does, partway through it. Neither is a bedside backup at this size.
Battery budget usedlower = more headroom
LOAD CPAP Machine 40W×8h
SCN-04 · 8 hours · needs 910Wh
Remote Workday
Full work day off-grid without power anxiety
Neither unit
Neither unit covers this scenario's 910Wh: the Elite 30 V2 comes up 665Wh short (about 27% covered), the Sherpa 100AC 830Wh (9%). This is well outside what either unit is for; the right answer here is a larger station, not a choice between these two.
Battery budget usedlower = more headroom
LOAD Laptop 60W×8h · External Monitor 30W×8h · Router + Modem 20W×8h · Phone Charger 15W×2h
SCN-05 · 4 hours · needs 670Wh
Tailgate Party
Game day power for the crew
Neither unit
The Sherpa 100AC can't run the 400W peak at all — 150W is the most its inverter will pass even momentarily, so capacity never gets a say. This is the wrong size of unit for the job rather than a close call. The Elite 30 V2 doesn't have the energy either — 245Wh usable against 670Wh, 425Wh short — so neither route works.
Battery budget usedlower = more headroom
LOAD Blender 400W×0.5h · LED TV (55") 80W×4h · Bluetooth Speaker 15W×4h · Phone Charger (×3) 45W×2h
SCN-06 · 24 hours · needs 4,685Wh
Van Life Daily
A full day of mobile living — the ultimate endurance test
Neither unit
The Sherpa 100AC can start the 150W peak but not hold it — 150W of surge gets it going, then the 100W continuous rating takes over, so capacity never gets a say. This is the wrong size of unit for the job rather than a close call. The Elite 30 V2 doesn't have the energy either — 245Wh usable against 4,685Wh, 4,440Wh short — so neither route works.
Battery budget usedlower = more headroom
LOAD Mini-Fridge 150W×24h · Laptop 60W×4h · Phone Charger 15W×3h · LED Lights 40W×5h · Fan 75W×8h
SCN-07 · an afternoon · needs 100Wh
Afternoon Off-Grid
Phones and a speaker at the park, beach, or campsite — the small-unit job description
Elite 30 V2
The Sherpa 100AC doesn't finish — 80Wh usable against the 100Wh this needs leaves it 20Wh short, about 81% of the scenario covered. The Elite 30 V2 covers it with 145Wh to spare.
Battery budget usedlower = more headroom
LOAD Phone Charger (×2) 30W×2h · Bluetooth Speaker 10W×4h
The Load Test
RUNTIME = (Wh × 0.85) ÷ LOAD
None of the scenarios above exactly yours? Build it. Toggle what you'd plug in; both units are tested against the combined draw.
Essentials
Comfort & Convenience
High-Draw Appliances
Test duration
8h
Continuous draw
205W
Projected runtime
Only the Elite 30 V2 can start this 205W load.
$239 list · direct from BLUETTI
Modeled from the spec record — same math as the tables below. Methodology
Runtime by appliance
Real-world runtime estimates for common appliances, modeled at 85% inverter efficiency.¹
Essentials
The basics you need runningscale 0–16.3hComfort & Convenience
Makes off-grid life actually enjoyablescale 0–3.3hHigh-Draw Appliances
These reveal the real limits¹ Runtime = (capacity × 0.85) ÷ appliance watts. Within each group, all bars share one time scale (the group's longest runtime), so lengths are comparable across appliances; identical runtimes collapse into a single blue/orange bar. Actual runtime varies with battery age, temperature, and simultaneous loads — see methodology.
Conclusion
July 10, 2026
Verdict: the Elite 30 V2
The Elite 30 V2 takes the lead, with 193.3Wh more capacity and 500W more output than the Sherpa 100AC. It costs $10.9 less as well, which makes it the easier call.
Overall score margin: 1,797 vs 682 (+163.5%)
List prices as of July 10, 2026. The links below open BLUETTI's and Goal Zero's current prices.
$249.99 · direct from BLUETTI
Last checked 8 hours ago. Prices move — check before you buy.
or check the Sherpa 100AC price$249.95 list
Written by Wenny Zheng, Portable Power Tester · Station Arena Test Desk · Updated July 10, 2026
Measured Data
Benchmark scores and the full spec record, side by side.
Benchmark scores
Not rated for both units (minimum threshold unmet): UPS, CPAP, Solar Generator, Tailgating, Apartment Balcony, Camping.
Full specifications
ᵈ Derived: price ÷ rated capacity. See the data behind our comparisons →
Comparison ToolAdd more power stations, side by sideOpen Tool →How these numbers are produced
Numeric verification
Every figure on this page traces to our spec database or arithmetic on it — no estimated numbers.
Owner claims
Statements about owner experience are cited to published reviews.
Runtime model
Runtime = (rated capacity × 0.85 inverter efficiency) ÷ device wattage. Solar recharge estimates assume panels deliver 70% of rated output. Cold weather, battery age, and stacked loads reduce real-world results.
Power Score
Computed from 14 published spec dimensions, weighted per use-case bench. Higher is better; a unit must meet a bench's minimum threshold to be rated.
See the full weight table and data sourcing on our methodology page →Class ranking (the star rating)
Each unit's star score is a category ranking, not customer reviews — no buyer opinions feed it. We score every station on size-independent quality (value, output, portability, endurance, ports, warranty, and more), then percentile-rank it against the other units in its capacity class, so a class-leading compact unit and a class-leading whole-home unit can both earn 5★. Here, Elite 30 V2 rates 4.9/5 (95th percentile of 22 Personal-class units), and Sherpa 100AC rates 3.3/5 (1st percentile of 22 Personal-class units).
How the class ranking is computed →Test Notes & Caveats
Hidden gotchas and advantages we spotted that you won't find on the product page.
Sherpa 100AC: No App Control
Without app control, you have to physically walk to the Sherpa 100AC to check battery level, adjust settings, or monitor power draw. The Elite 30 V2 lets you do all that from your phone, including getting low-battery alerts.
Elite 30 V2: Power Lifting to 1,500W
The Elite 30 V2 has BLUETTI's Power Lifting mode, which runs a resistive appliance rated up to 1,500W from its 600W inverter. It does that by delivering less power than the appliance asks for, not more than the inverter has: the heater still works, it just heats more slowly. Two things follow. BLUETTI scopes the mode to purely resistive loads — a heater, a kettle, an incandescent lamp — so it does nothing for a fridge compressor, a pump or a power tool, and this record publishes no surge figure at all, so read the mode as a resistive-load feature rather than as starting ability. And it is not a reason to size down, because running a load that big from 288Wh is a short session either way. Genuinely useful if a heater or a kettle is why you're buying; beside the point otherwise. The Sherpa 100AC publishes no equivalent.
Only the Elite 30 V2 Lists a UPS Mode
The Elite 30 V2 can sit between the wall and your gear and hand it to battery when the grid drops — rated ≤10ms — quick enough on paper that desktop PCs and routers should ride through, treating that as the rating it is. Worth it for a router or a modem — not a CPAP: at 245Wh usable it can bridge the flicker but cannot run the night. The Sherpa 100AC's spec sheet lists no UPS mode, so anything plugged into it rides an outage only as far as your reaction time.
Warranty: 5 Years vs 2
The Elite 30 V2 is covered for 5 years against the Sherpa 100AC's 2 years. The Elite 30 V2's figure is a maximum rather than a guarantee — it depends on buying direct from BLUETTI or registering the unit, since reseller purchases carry a shorter term. An underrated factor if you're keeping this unit for years.
Battery Lifespan in Real Years
The Elite 30 V2 is rated for 3,000 cycles vs 500. In real life: at daily use, that's 8.2 vs 1.4 years. At weekend use (twice a week), it's 29 vs 5 years. One caution reading years across different sizes: a cycle is 288Wh on the Elite 30 V2 and 95Wh on the Sherpa 100AC, so count lifetime energy — roughly 864 kWh against 47 kWh over the rated life. After hitting the cycle limit, the battery doesn't die — it drops to ~80% of original capacity, which is still very usable.
Sherpa 100AC: Noise Level Not Disclosed
The Elite 30 V2 publishes its noise level (30dB); the Sherpa 100AC doesn't publish one. That isn't evidence the Sherpa 100AC is louder — it means there's no figure to hold it to, and no way to compare the two on this without hearing them. If you're buying for a bedroom, a CPAP, or an apartment, treat the Elite 30 V2's 30dB as the only published number on the table — a spec-sheet figure, not a measurement — and look for hands-on reports of the Sherpa 100AC before deciding.
Full record above — the Test Desk pick is the Elite 30 V2.
Check Elite 30 V2 price →or check the Sherpa 100AC priceOwnership Analysis
What happens after you buy — true cost of ownership, brand trust, and growth potential.
Lifetime value
Service lifeyears at one full cycle per day
Lifetime energy delivered
Cost per delivered kWh
│ warranty ends · Reaching the cycle rating means ~80% capacity remains — degraded, not dead.
Analyst note
The Elite 30 V2 wins on both sticker price and long-term value. At $0.28/kWh over its lifetime, it's meaningfully cheaper to own. Clear value winner.
Delivers each lifetime kWh for $5.00 less — check the Elite 30 V2 price →
Brand trust
BLUETTI
Ecosystem
One of the broadest lineups — 15-20+ models from budget (AC2A) to flagship portable (Apex 300, 2764.8Wh). Includes specialized products: vehicle solar hubs, sodium-ion cold-weather units, and balcony storage systems.
Support
The most inconsistent support in the space. Heavily email-based with China timezone delays. Some users get smooth, efficient service; others report weeks of troubleshooting runarounds, being offered discounts on new units instead of repairs, and confusing third-party purchase claim processes. Buying direct from Bluetti's website tends to produce better support outcomes.
Community
Active and growing — Reddit r/bluetti has a dedicated community. Second-largest after EcoFlow in engagement.
App experience
Rated 4.5/5 iOS and Android — tied for best app experience in the category. V3.0 UI redesign was well-received.
Unique strength
Among the best capacity-to-price ratios available — several Elite and Apex units are the lowest $/Wh in the catalog. Widest product diversity including industry-firsts like sodium-ion cold-weather units and dual solar+alternator vehicle hubs. LFP across the rest of the range, though rated cycle life spans 2,500 (EB3A) to 6,000, and it varies WITHIN the Elite range rather than tracking it — the Elite 300 and Elite 200 V2 are rated 6,000 while the Elite 30 V2, Elite 10 Mini, Elite 320 and Elite 400 are rated 3,000+ and the Elite 100 V2 4,000+, so check the specific model. Dual-voltage (120V/240V) in flagships.
Worth knowing
Customer support inconsistency is the #1 risk factor. Older/discontinued units may become unrepairable — no spare parts policy for some models. Some reports of erratic communication from support agents.
Goal Zero
Ecosystem
Focused — a compact current line (6th-gen Yeti and Yeti Pro series), the previous-gen X series now out of stock across every model on Goal Zero's own store (checked 2026-09-13: 200X, 500X, 1000X, 1500X, 3000X, 6000X, some listed only as open-box), so buying one new means finding retailer stock, Sherpa power banks for the under-100Wh tier, plus Alta coolers, Nomad/Ranger solar panels, and vehicle integration kits
Support
US-based company (Salt Lake City, owned by NRG Energy). Historically considered premium support, but 2025-2026 reports describe long wait times, unresponsive email communication, and tickets going unaddressed for weeks. The "premium support justifies premium pricing" argument is weakening.
Community
Small but loyal — strong following in overlanding and preparedness communities. Official community forums were recently shuttered, frustrating long-time users.
App experience
Rated 4.4/5 iOS (~1,200 ratings) but recent reviews skew negative — recurring connectivity issues, crashes, and stability problems.
Unique strength
Pioneer of the portable power market — strongest brand heritage. US-based company with ruggedized, weather-resistant designs (IP ratings vary by model). Integrated "Yeti-Ready" ecosystem with coolers, lights, and vehicle kits.
Worth knowing
Typically the priciest brand per watt-hour — though individual pairings vary, and on some pages the Yeti is the cheaper energy. Support quality has declined from its "premium" standard. Perceived as competitively stagnant vs. faster-innovating Chinese competitors. Reliability reports on newer models are concerning.
Analyst note
Goal Zero positions itself as a premium brand with stronger support infrastructure, while BLUETTI competes on value. The question is whether the Goal Zero ecosystem and support premium is worth it for your use case.
Growth path
Elite 30 V2
FIXED CAPACITYFixed at 288Wh, with no expansion — so size it for your needs up front rather than planning to add capacity later.
Accepts up to 200W of solar. Limited to a single portable panel.
Limited ports. You'll likely need a power strip or splitter.
Sherpa 100AC
FIXED CAPACITYFixed at 95Wh, with no expansion — so size it for your needs up front rather than planning to add capacity later.
Accepts up to 60W of solar. Limited to a single portable panel.
Limited ports. You'll likely need a power strip or splitter.
Realistic full solar rechargeat 70% of rated panel output — see methodology
Analyst note
Neither expands, and that's no knock on either — each is a complete unit at a fixed size. Buy the capacity that covers your needs now (the Elite 30 V2 gives you the larger ceiling); you can't add to either later.
The Bottom Line
The full picture comes down to this. The Elite 30 V2 edges ahead on our overall analysis, but the margin is narrow enough that your specific use case should drive the decision. Review the scenario verdicts above — if the Sherpa 100AC wins in the scenarios that match your life, it's the right choice regardless of aggregate scores.
If neither the Elite 30 V2 nor the Sherpa 100AC feels like the right fit, your power needs probably sit outside what these two target. If you're planning whole-home backup or running power-hungry appliances (electric heaters, window AC), you'll want a larger system in the 3,000–5,000Wh range with expansion battery support. Prices on portable power stations fluctuate frequently. Both BLUETTI and Goal Zero discount regularly, so check the current price before committing. Prime Day and Black Friday pricing typically drops 20-30%.
Frequently Asked Questions
Answers drawn from the spec record and cited owner research.
"3,000 vs 500 cycles" — what does that actually mean for me?
In real years: the Elite 30 V2 (3,000 cycles) lasts 8.2 years at daily use, 29 years at weekend use (twice a week), or 125 years at twice-monthly camping trips. The Sherpa 100AC (500 cycles): 1.4 years daily, 5 years weekends, or 21 years twice-monthly. What most people miss: hitting the cycle limit doesn't kill your battery. Capacity drops to about 80%. Your 288Wh unit becomes a ~230Wh unit. Still very usable. For weekend users, both batteries will outlast the warranty by years.
Can I use the Elite 30 V2 as a home UPS to protect my electronics during blackouts?
Yes. The Elite 30 V2 has UPS mode with true 0ms switchover (double-conversion). Even hospital-grade equipment won't notice. Plug in your desktop PC, router, NAS, or CPAP machine and it switches to battery seamlessly when the grid drops. The Sherpa 100AC does not have this feature. Without UPS, a blackout means: your PC reboots (potentially corrupting unsaved work), your NAS may corrupt its drive array, your CPAP alarms and wakes you up, and your security cameras go dark until you manually switch them over. If always-on power protection matters, this is a dealbreaker advantage for the Elite 30 V2.
Is BLUETTI or Goal Zero more reliable for long-term ownership?
Both brands have strengths and trade-offs. BLUETTI: 2-6 years depending on model (up to 10 years on home backup systems). Response times vary significantly. Some reports of units being deemed unrepairable with no parts available for older models. Goal Zero: 5 years on LFP models, 2 years on older NMC models. Battery must be charged within 7 days of purchase and every 6 months to maintain warranty (strict). Product reliability concerns have increased — repeat "Battery Fault" errors reported even on newer Yeti Pro 4000. One piece of advice from the power station community: regardless of brand, buy from Costco or Amazon. Their return policies provide a safety net that manufacturer warranties alone can't match, especially for a product you'll rely on in emergencies. Both brands use LFP (lithium iron phosphate) batteries in their current lineup, the most proven chemistry for longevity and safety.
Bottom line: should I buy the Elite 30 V2 or the Sherpa 100AC?
We'd buy the Elite 30 V2. Cheaper and more capable. That combination is rare. The Sherpa 100AC doesn't offer a compelling reason to spend more unless you specifically need a feature unique to the Goal Zero ecosystem (expansion batteries, app integrations). Otherwise, clear call.
Where to buy
BLUETTI Elite 30 V2Pick
$249.99
$249.99 · direct from BLUETTI
Last checked 8 hours ago. Prices move — check before you buy.
Goal Zero Sherpa 100AC
$249.95
$249.95 · direct from Goal Zero
Last checked 8 hours ago. Prices move — check before you buy.
Prices may vary by retailer and are subject to change.