PSA
StationArena

Solar · DJI

Solar panels for the DJI Power 2000

Written by Ian Schneider·Solar & Off-Grid Tester

DJI's manual gives the Power 2000 three ways to charge from the sun, and every one of them is an accessory sold separately. The station has no solar socket of its own. The path this page covers is the DJI Power Solar Panel Adapter Module, a $59 box that plugs into one of the station's SDC ports, DJI's connectors for its own accessories. The MPPT in its full name stands for maximum power point tracking, the circuit that holds a panel at the voltage where it gives the most. Most stations build that circuit in. DJI sells it on the side. Facing the panels, the module offers XT60 sockets, the stout yellow DC plug most portable panels can be cabled to.

The 1800 W in our catalogue's solar row belongs to the third path, the 1.8kW Solar/Car Super Fast Charger, and nothing below is about that accessory. The module is rated for 12 to 30 volts and, on the Power 2000, 400 W. Up to three panels can hang off it, side by side rather than chained together. DJI's FAQ says to keep every panel under 30 volts, because above that the module and the station can both be damaged. Of the forty-one panels we track, seventeen come in under the line and eighteen do not. None of them is DJI's. DJI makes the module and no panel to go with it.

400 W into 2048 Wh is the slow part. Two sets we track fill the module, three BLUETTI PV200s or three of Eco-Worthy's 195 W rigid panels, and either one has the battery full in about five hours of good sun. That is most of a clear day. One 200 W folding panel gives about 144 W and needs about fourteen hours. One 100 W panel needs about twenty-eight. At the cabin I'd lay three PV200s along the south edge of the deck first thing Saturday and expect a full battery by late afternoon, pine shadows allowing.

Solar charging needs the DJI Power Solar Panel Adapter Module (MPPT), sold separately.

The door
12–30 V
Its width
400 W
Plug
XT60
Full battery, best case
~5.1 h
DJI Power 2000 portable power station
The Power 2000 has two SDC ports. DJI never says whether a second adapter module may ride on the other one, so every figure on this page counts one.

The door

Every panel we track, lined up at the Power 2000's solar input

Every panel we track, standing in a row by the voltage on its label. That figure is the open-circuit voltage, Voc on the sticker, what a panel puts out in sun with nothing plugged into it. The black line is 30 V, and DJI's limit reads under 30 rather than up to it. A bar that reaches the line does not fit.

The pale cap on each bar is what a −10 °C morning adds, about 10%. Cold pushes a panel's voltage up, and on a 30 V module there is less room for that than on most stations. Three panels stand under the line warm and over it with the cap on. The Jackery SolarSaga 80W reads 28.5 on the label. On my deck in January it would be reading past 30 before the sun had cleared the pines. I'd give it a taller station.

The module's three sockets are for three panels in parallel, each on its own lead, with the voltages staying where they are. DJI's manual rules out series, where panels are chained end to end and their voltages add. Even the shortest bar on this chart, doubled, lands well past the line.

Hover over a bar and the panel names itself. If you already own a panel, read the Voc off the label on its back and type it into the field below the chart. The chart draws it beside the others.

Swipe sideways for the whole line-up.

010203040506070volts, open-circuit+1++yours?30 V · the lintel12 V · the step

Hover or tap a bar for the panel’s name and its verdict.

  • Fits through the door
  • Too tall
  • Extra height on a −10 °C morning
  • Maker prints only the operating voltage; the real height is above the dashes
  • 1Our pick: BLUETTI PV200

What we'd buy

The best solar panel for the Power 2000

Picked by the numbers on this station, not by brand.

Best overall

200 W
BLUETTI PV200 (200W Solar Panel)

3 panels deliver 400 W, the most the input takes.

Best value

Renogy 100W N-Type Lightweight Portable Solar Panel Suitcase (COMPACT-SUITCASE 100 / RSP100LSC)

About $2.01 for every watt it actually delivers here. 4 panels deliver 288 W.

Check price at Renogy

Best to carry

Renogy 200W Portable Solar Panel Blanket (RPP200SB-SE)

144 W from a 8.82 lb panel, the most delivered watts per pound.

Check price at Renogy

A day on solar

How long the Power 2000 takes to charge on solar

About five hours, with the module taking its full 400 W. Two sets we track get it there. One 200 W folding panel on its own gives about 144 W in real sun and needs about fourteen hours. One 100 W panel gives about 72 W and needs about twenty-eight.

A good day has three to six hours of sun that strong. The full-module set has the Power 2000 done in one long day of it. One 200 W panel does not finish in a weekend, and one 100 W panel is not close. How many of those days a month gives you depends on where you live, and the system builder keeps that figure by state.

a good day's sun: 3 to 6 h0 h1 h2 h3 h4 h5 h6 h7 h8 h9 h10 h11 h12 h13 h14 h15 h16 h17 h18 h19 h20 h21 h22 h23 h24 h25 h26 h27 h28 h29 hInput full (400 W) · full in 5.1 hOne 200 W panel (144 W delivered) · full in 14.2 hOne 100 W panel (72 W delivered) · full in 28.4 h

Hours of good sun, from empty. Where you live and the month decide how many of those a day gives; the system builder works it out.

Every panel that fits

Solar panels compatible with the Power 2000

Seventeen fit, sorted by delivered watts. For each one: the lead it needs to reach the module, what a single panel delivers in good sun, and the most the module will accept from a set. None plugs straight in. Seven of the seventeen end in MC4, the weatherproof snap-together connector on rigid panels and the bigger folders, so their lead is MC4 to XT60. Jackery's panels want an Anderson or a DC8020 lead instead. The manual also asks that the panels on one module all be the same type.

Too tall

Solar panels that won't work with the Power 2000

Eighteen read over 30 V on the label. Most were built for stations with much taller inputs and are fine there. On this module the voltage would arrive higher than DJI built it for, and DJI's warning names the station as well as the module. Renogy's 200W N-Type rigid panel reads 37.44 V and is out. Renogy's 200 W folding blanket reads 19.6 V and is in. Same rated watts, a different panel.

Three cross only on a cold morning: the BLUETTI SORA 60 at 27.5 V, the Jackery SolarSaga 80W at 28.5 and the Eco-Worthy 200W Flexible at 29.1. The Jackery SolarSaga 100 Air is out before the cold gets to it. It reads 29.7 on the label, and Jackery allows 5% either way.

None of the eighteen would come up to the cabin for this station, and I'd leave the three cold-morning cases at home with them. The cap on those bars is drawn for the kind of morning my deck has in January.

Over the 30 V lintel (18)

No verdict (6): the maker doesn't publish an open-circuit voltage

Own a panel that isn't in the line-up?

Type its voltage into the door chart above for the height test, then put the rest of the label into the panel checker, already set to the Power 2000, for current and plug too. Or build the whole system to see how it keeps up where you live.

The plain answers

How long does the Power 2000 take to charge on solar?

One 100 W panel delivers about 72 W in good sun and refills the 2048 Wh battery from empty in about 28.4 hours.

One 200 W panel delivers about 144 W in good sun and refills the 2048 Wh battery from empty in about 14.2 hours.

At its 400 W solar limit it refills in about 5.1 hours. More panel watts than that won't charge it any faster.

A day gives three to six hours of sun that good, depending on season and place, so one 100 W panel takes 5 to 10 days to fill it. The system builder works it out for your state and month.

What adapter does the Power 2000 need for solar?

Every panel we track needs a cable to reach its XT60 input.

The cables they need: MC4 to XT60 (7 panels), DC8020 to XT60 (2 panels), Anderson to XT60 (2 panels) and DC5521 to XT60 (1 panel).

5 panels don't have a named plug from their maker, so check the lead before you buy a cable.

Can you use non-DJI solar panels with the Power 2000?

Yes. What decides it is the panel's voltage and plug, not the brand. 17 panels from EcoFlow, BLUETTI, Jackery, Renogy, Rich Solar and Eco-Worthy work with it, as long as the panel stays under 30 V on a cold morning and starts above 12 V.

The strongest single panels here are the EcoFlow NextGen 220W Bifacial Portable (158 W delivered) and the BLUETTI PV200 (144 W delivered).

Can you connect two solar panels to the Power 2000?

Yes, joined into one input with a series or parallel cable.

Don't wire two BLUETTI SP100L panels in series: together they would pass its 30 V limit. Parallel them instead.

Past 400 W delivered, more panels only help on cloudy days.

What is the Power 2000's solar input?

SDC port via DJI Power Solar Panel Adapter Module (MPPT) - module exposes XT60 to panels: 12–30 V, up to 20 A, 400 W.

Input limits from DJI's documents, checked 2026-09-18 (source). Delivered watts assume 72% of the panel's rating in good sun.

Also worth reading