PSA
StationArena

Solar · BLUETTI

Solar panels for the BLUETTI Elite 300

Written by Ian Schneider·Solar & Off-Grid Tester

The Elite 300 takes solar through one XT60 socket, a squat yellow two-pin DC plug, at 12 to 60 volts and up to 1,200 W. Thirty-one of the forty-one panels we track publish a voltage, and all thirty-one sit under the line. Nothing with a published voltage is too tall for it. If BLUETTI's product page tells you something else, it is quoting the older AC300. The manual and the page's own FAQ agree on 12 to 60.

The other number is the battery. 3014.4 Wh is a lot of sun to catch, and no panel we track fills the input. Three of Renogy's 590 W rigid panels come closest at 961 W, about three hours of good sun to full. One 200 W folding panel gives about 144 W and needs about twenty-one hours, half a week of good weather at best. At the cabin I'd feed this one from the array on the roof and keep the folding panel for smaller boxes.

The door
12–60 V
Its width
1200 W
Plug
XT60
Full battery, best case
~2.5 h
BLUETTI Elite 300 portable power station
The manual calls the socket DC Input (XT60-F). The product page calls it XT60 (male). Either way, bring the cable, because it isn't in the box.

The door

Every panel we track, lined up at the Elite 300's solar input

Every panel we track with a published voltage, in a line by that voltage. The number is the open-circuit voltage, Voc on the back label, what a panel puts out in sun with nothing plugged into it. The black line is 60 V. Every bar stops short of it.

The pale cap on each bar is the cold-morning addition, about 10% at −10 °C. Cold raises a panel's voltage, which surprises people the first time they see it on a Fluke. On my deck in January I'd expect the Renogy 590 W to read a few volts above its 52.63 V label. Still under 60, cap and all.

The chart draws one panel at a time. Wire two in series, positive of one to the negative of the next, and their voltages add. The Jackery SolarSaga 500 X reads 48.5 V alone, so a pair of them in series is well over the line. Side by side instead, in parallel, the voltage stays put and the current adds. The Elite 300 stops taking current at 22 A.

Hover a bar for the panel's name. If you own a panel that isn't here, type its Voc below and it joins the line.

Swipe sideways for the whole line-up.

020406080volts, open-circuit+1++yours?60 V · the lintel12 V · the step

Hover or tap a bar for the panel’s name and its verdict.

  • Fits through the door
  • Too tall
  • Extra height on a −10 °C morning
  • Maker prints only the operating voltage; the real height is above the dashes
  • 1Our pick: BLUETTI 350W

What we'd buy

The best solar panel for the Elite 300

Picked by the numbers on this station, not by brand.

Best overall

BLUETTI 350W Solar Panel (PV350)

4 panels deliver 814 W.

Check price at BLUETTI

Best value

Eco-Worthy 200W Flexible HJT Solar Panel 18V ETFE 18BB (GW-L02AM200HJT2)

About $1.30 for every watt it actually delivers here. 4 panels deliver 552 W.

Check price at Eco-Worthy

Best to carry

Renogy 200W Portable Solar Panel Blanket (RPP200SB-SE)

144 W from a 8.82 lb panel, the most delivered watts per pound.

Check price at Renogy

A day on solar

How long the Elite 300 takes to charge on solar

Two and a half hours, if something could fill the input. Nothing we track does. Three of Renogy's 590 W rigid panels come closest at 961 W, which puts the tick at about three hours. Three Jackery SolarSaga 500 X panels do 917 W in a little over three hours and weigh a good deal less each.

More likely you own a folding panel or two. One 100 W panel gives about 72 W in real sun and needs about forty-two hours. A 200 W panel gives 144 W and needs about twenty-one. A good day has 3 to 6 hours of sun that strong. Call the 200 W panel half a week of good weather and the 100 W panel a week or more. The system builder turns those hours into days for your state and your month.

a good day's sun: 3 to 6 h0 h1 h2 h3 h4 h5 h6 h7 h8 h9 h10 h11 h12 h13 h14 h15 h16 h17 h18 h19 h20 h21 h22 h23 h24 h25 h26 h27 h28 h29 h30 h31 h32 h33 h34 h35 h36 h37 h38 h39 h40 h41 h42 h43 hInput full (1200 W) · full in 2.5 hOne 200 W panel (144 W delivered) · full in 20.9 hOne 100 W panel (72 W delivered) · full in 41.9 h

Hours of good sun, from empty. Where you live and the month decide how many of those a day gives; the system builder works it out.

Every panel that fits

Solar panels compatible with the Elite 300

Thirty-one fit, five of them BLUETTI's own. For each: the cable that gets it into the XT60 socket, what one panel delivers in good sun, and the most the Elite 300 will take from a set of them. Eleven want an MC4-to-XT60 lead; MC4 is the weatherproof pair of snap-together plugs that rigid panels and most big folding panels end in. One of the thirty-one plugs in with no adapter, EcoFlow's 125 W modular rigid. Sorted by delivered watts.

BLUETTI's own, the pairings it documents

  • 200 W
    BLUETTI PV200 (200W Solar Panel)
    200 W · portable · 17.15 lb · 24.6 V
    BLUETTI lists this pairing
    Plug: MC4 → XT60 adapter
    One panel: 144 W in good sun
    Best with up to 4: 4 panels → 576 W, full in ~5.2 h
    2 in series × 2 strings
  • BLUETTI 350W Solar Panel (PV350)
    350 W · portable · 32.4 lb · $649 · 44 V
    BLUETTI lists this pairing
    Plug: MC4 → XT60 adapter
    One panel: 252 W in good sun
    Best with up to 4: 4 panels → 814 W, full in ~3.7 h
    4 in parallel
    Check price at BLUETTI

Everyone else's

Own a panel that isn't in the line-up?

Type its voltage into the door chart above for the height test, then put the rest of the label into the panel checker, already set to the Elite 300, for current and plug too. Or build the whole system to see how it keeps up where you live.

The plain answers

How long does the Elite 300 take to charge on solar?

One 100 W panel delivers about 72 W in good sun and refills the 3014.4 Wh battery from empty in about 41.9 hours.

One 200 W panel delivers about 144 W in good sun and refills the 3014.4 Wh battery from empty in about 20.9 hours.

At its 1200 W solar limit it refills in about 2.5 hours. More panel watts than that won't charge it any faster.

A day gives three to six hours of sun that good, depending on season and place, so one 100 W panel takes 7 to 14 days to fill it. The system builder works it out for your state and month.

What adapter does the Elite 300 need for solar?

None, if the panel's plug is XT60: EcoFlow 125W Bifacial Modular plugs straight in. No solar adapter comes in the Elite 300's box, so any other panel needs a cable bought separately.

The cables the other panels need: MC4 to XT60 (11 panels), DC8020 to XT60 (4 panels), Anderson to XT60 (3 panels) and DC5521 to XT60 (2 panels).

10 panels don't have a named plug from their maker, so check the lead before you buy a cable.

Can you use non-BLUETTI solar panels with the Elite 300?

Yes. What decides it is the panel's voltage and plug, not the brand. 26 panels from Renogy, Jackery, Anker SOLIX, EcoFlow, Eco-Worthy and Rich Solar work with it, as long as the panel stays under 60 V on a cold morning and starts above 12 V.

The strongest single panels here are the Renogy 590W N-Type Bifacial (425 W delivered) and the Jackery SolarSaga 500 X (360 W delivered).

Can you connect two solar panels to the Elite 300?

Yes, joined into one input with a series or parallel cable.

Don't wire two BLUETTI PV100 FX Flexible panels in series: together they would pass its 60 V limit. Parallel them instead.

Past 1200 W delivered, more panels only help on cloudy days.

What is the Elite 300's solar input?

DC Input (XT60-F): 12–60 V, up to 22 A, 1200 W.

Input limits from BLUETTI's documents, checked 2026-09-18 (source). Delivered watts assume 72% of the panel's rating in good sun.

Also worth reading